1.3. Integrating with your data > Integrating PlugSales with Firebird

This guide explains how to configure PlugSales integration with the Firebird database through PlugBot, allowing information to be correctly synchronized with the application.

---

Integration with Firebird database

To start the integration with Firebird, access the PlugBot control panel and click on the PlugSales tab.

On the displayed page:

• Click on “Half integration”.
• Select the “Firebird Database” option.

After selecting the integration method, fill out the form presented with information from your Firebird database.

---

Attention for versions of Firebird 3.0 or higher

If your Firebird version is 3.0 or newer, you may need to make an adjustment to the firebird.conf configuration file, located in the Firebird installation folder.

If connecting to PlugBot is unsuccessful, add the following lines to the file:

AuthServer = Legacy_Auth

WireCrypt = Enabled

Important:

• We recommend stopping the Firebird service before editing the firebird.conf file.
• After making the change, save the file and restart the Firebird service.
• Then try the integration again.

We also recommend using Firebird versions higher than 2.5.8, as previous versions may not be successful in connecting to PlugBot.

---

Finalizing the connection

With all the information filled in correctly, click on “Connect Firebird Database”.

Ready! The integration will be configured and PlugSales will be able to synchronize the data normally.

If you have any questions, we are at your disposal.